page . 1 march 23,2015-rev.04 pjdlc05c-05 fig.21 features ? maximum capacitance @ 0 vdc bias of 1 pf between terminals 1-3 or terminals 2-3 ? iec61000-4-2 esd 15kv air, 8kv contact compliance ? lead free in compliance with eu rohs 2011/65/eu directive ? green molding compound as per iec61249 std. . (halogen free) voltage power 5 volt 400 watt mechanical data ? case: sot-23, plastic ? terminals: solderable per mil-std-750, method 2026 ? approx. weight: 0.0003 ounce, 0.0084 gram ? marking: dea maximum ratings electrical characteristics 1 2 3 ultra low capacitance dual transiet voltage suppressor for high speed data lines this transient overvoltage suppressor is intended to protect sensitive equipment against electrostatic discharge events as well to offer a minimum insertion loss in data transmission lines in communications ports used in portable consumer, computing and networking applications. this dual transient voltage suppressor comes in a single sot-23, offering board space reduction, where the application requires it. this device comes with two pairs of high speed switching diodes connected in series, where both pairs are electrically isolated, offering a very low capacitance, minimizing the insertion losses in data transmission lines. parameter symbol conditions minimum typical maximum units reverse stand-off voltage v rwm ---5v reverse breakdown voltage v br i t =1ma 6 - - v reverse leakage current i r v rwm = 5v, t = 25 o c -0.81.2 a junction capacitance c j between pin1.2 to 3 v r =0v,f=1mhz --1pf peak pulse current i pp t p =8/20 sec - - 17 a clamping voltage v c t p =8/20 sec @1a - - 9.5 v clamping voltage v c t p =8/20 sec @5a - - 12 v parameter symbol value units operating junction t j -55 to +150 o c storage temperature range t stg -55 to +150 o c 0.120(3.04) 0.110(2.80) 0.056(1.40) 0.047(1.20) 0.079(2.00) 0.070(1.80) 0.020(0.50) 0.013(0.35) 0.044(1.10) 0.035(0.90) 0.006(0.15)min. 0.008(0.20) 0.003(0.08) 0.004(0.10) 0.000(0.00)
page . 2 march 23,2015-rev.04 pjdlc05c-05 fig 2- pulse waveform power derating curve 5 010152025 30 110 100 90 80 70 60 50 40 30 20 10 0 time sec , percent of ipp rise time s 10-90% - 8 50% @20 of ipp s 6 0.1 8 1 10 10 12 100 14 1000 24 18 20 22 16 clamping voltage volts , pulse duration, sec 820 , x sec peak current amps peak pulse power kw , 18 16 14 12 10 8 6 10 4 1 2 0.1 0 0.01 fig 1- clamping voltage vs ipp x sec 820 fig 1- clamping voltage vs ipp x sec 820 fig 3- non repetitive peak pulse power vs pulse time - fig.4- typical junction capacitance under bias fig.4- typical junction capacitance under bias reverse bias voltage, v capacitance c j ,pf 0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0246
page . 3 march 23,2015-rev.04 pjdlc05c-05 mounting pad layout order information ? packing information t/r - 12k per 13" plastic reel t/r - 3k per 7" plastic reel 0.031 min. (0.80) min. 0.037 (0.95) 0.043 (1.10) 0.078 (2.00) 0.035 min. (0.90) min. 0.043 (1.10) 0.106 (2.70)
page . 4 march 23,2015-rev.04 pjdlc05c-05 part no_packing code_version pjdlc05c-05_r1_00001 pjdlc05c-05_r2_00001 for example : rb500v-40 _ r2 _ 00001 part no. serial number version code means hf packing size code means 13" packing type means t/r packing code xx version code xxxxx packing type 1 st code packing size code 2 nd code hf or rohs 1 st code 2 nd ~5 th code tape and ammunition box (t/b) a n/a 0 hf 0 serial number tape and reel (t/r) r 7" 1 rohs 1 serial number bulk packing (b/p) b 13" 2 tube packing (t/p) t 26mm x tape and reel (right oriented) (trr) s 52mm y tape and reel (left oriented) (trl) l panasert t/b cathode up (pbcu) u forming f panasert t/b cathode down (pbcd) d
page . 5 march 23,2015-rev.04 pjdlc05c-05 disclaimer ? reproducing and modifying information of the document is prohibited without permission from panjit international inc.. ? panjit international inc. reserves the rights to make changes of the content herein the document anytime without notification. please refer to our website for the latest document. panjit international inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ? panjit international inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ? applications shown on the herein document are examples of standard use and operation. customers are responsible in comprehending the suitable use in particular applications. panjit international inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ? the products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify panjit international inc. for any damages resulting from such improper use or sale. ? ? since panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining.
|
